Timbren SES Suspension Enhancement System, DF25004B Front Kit

Weight from a snowplow or heavy aftermarket accessories can cause dangerous front-end sag and sway. When heavy weight is distributed only onto the front two tires, it can create difficult handling conditions and risk damage to your front-end suspension from bottoming out.The Timbren SES Suspension Enhancement System Front Kit levels out your front-end load, making for a safe, controlled ride. Aeon rubber springs deliver a progressive spring rate. As load increases, these rubber springs push back harder, eliminating squat, sway, and roll to put you back in control of your vehicle. After installation, the rubber spring should be in contact with the front axle.What makes the Timbren SES Kit different from other suspension enhancement systems? Unlike air bags, this kit requires zero post-installation maintenance. And unlike other systems, you can install and haul in under 30 minutes, right from your driveway.• Reduces front-end sag and sway• Comfortable ride, loaded or unloaded• DIY installation• Zero post-installation maintenanceSpecsRated Capacity: 6000 lbs.Overall Kit Height: 5.0″NOTE: Even though you’re increasing the spring rate by adding this upgrade, this does not increase the GVWR (Gross Vehicle Weight Rating). Please make sure that the load does not exceed the GVWR set by the manufacturer.What’s IncludedTwo patented Aeon SES suspensions (hollow rubber springs)Two rubber mountsTwo steel mounting disksAll necessary hardwareFitmentSuspension Support Location: Front SuspensionKit Type: Standard Kit1994-2001 Dodge RAM 1500 4WD2006-2008 Dodge RAM 1500 4WD Mega Cab1994-2010 Dodge RAM 2500 4WD1994-2002 Dodge RAM 2500HD 4WD1994-2010 Dodge RAM 3500 4WD1994-1999, 2003-2010 Dodge RAM 3500 Cab and Chassis 2WD1994-2010 Dodge RAM 3500 Cab and Chassis 4WD2011-2013, 2018-2023 RAM 2500 4WD2011-2013, 2018-2023 RAM 3500 4WD2011-2013 RAM 3500 Cab and Chassis 2WD2011-2013, 2018-2023 RAM 3500 Cab and Chassis 4WD