Timbren SES Suspension Enhancement System, DR2500CA Rear Kit

Unstable loads while towing and hauling don’t just make for an uncomfortable ride. Difficult handling, rear sag, and corner sway create dangerous driving conditions for you, your passengers, and other vehicles. Whether you’re towing your RV across the country or hauling hay down the highway, the Timbren SES Suspension Enhancement Kit levels your load, making for a safe, controlled ride, so smooth, you might forget you’re towing altogether.Aeon rubber springs deliver a progressive spring rate. As load increases, these rubber springs push back harder, eliminating squat, sway, and roll. After installation, there should be a 1/2″ to 1-1/2″ gap between the rubber spring and vehicle’s frame – meaning you’ll enjoy a comfortable unloaded ride.What makes the Timbren SES Kit different from other suspension enhancement systems? Unlike air bags, this kit requires zero post-installation maintenance. And unlike other systems, you can install and haul in under 30 minutes, right from your driveway.• Reduces sag, sway, and roll when towing and hauling• Comfortable ride, loaded or unloaded• DIY installation• Zero post-installation maintenanceSpecsRated Capacity: 6000 lbs.Kit Height without 1″ Spacer: 6.35″Kit Height with 1″ Spacer: 7.35″NOTE: Even though you’re increasing the spring rate by adding this upgrade, this does not increase the GVWR (Gross Vehicle Weight Rating). Please make sure that the load does not exceed the GVWR set by the manufacturer.What’s IncludedTwo patented Aeon SES suspensions (hollow rubber springs)Two 1″ rubber spacersTwo steel mounting bracketsAll necessary hardwareFitmentSuspension Support Location: Rear SuspensionKit Type: Standard Kit2002-2005 Dodge RAM 1500 2WD2006-2008 Dodge RAM 1500 2WD Mega Cab2002-2005 Dodge RAM 1500 4WD2006-2008 Dodge RAM 1500 4WD Mega Cab2003-2010 Dodge RAM 2500 2WD2003-2010 Dodge RAM 2500 4WD2011-2013 RAM 2500 2WD2011-2013 RAM 2500 4WD